Hertogvloeren

Comparing Automatic Gate Motors: Hydraulic Systems vs. Electromechanical Systems

There are many countermeasures to robbery and theft, but the most pivotal is a sturdy, indomitable gate in a community or a single property. Contrary to popular notion, a gate does not only secure; it also eases the life of proprietors, especially those who are dealing with transport delivery businesses. Moreover, as a response to the latter’s demand, the development of automatic gates is crescendoing for quite some time now.

automatic gates

A little history

Before, automatic gates were only for commercial use. Only a few of homeowners had the resources to install automatic gates, not to mention the cost of hydraulic systems. Along with this is the increase of cheaper electromechanical gates as an alternative to the pricey hydraulics. The latter costs more because it’s designed for heavy duty work and generate torque levels higher compared with electromechanical systems, which is more suitable for domestic use and cost-effective manufacturing. Now, both are presented to the market, leaving customers with either of the two as their choice depending on their usage.

Does the gate motor matter?

Gate motors run the automatic gates and as mentioned, come in two forms: electromechanical and hydraulic. All kinds of automatic gates use either of the two. As distinct as they can be, does the electric gate motor matter on what you are using it for? To answer that, let’s compare:

It was stated that electromechanical gates are more cost-efficient compared to hydraulics, but distinctively, they also vary on:

Manageability – When it comes to these two, electromechanical systems fare better. Since they are simpler and have fewer parts and settings to work on, a first-time operator wouldn’t have a hard time learning how to use them.

Reliability – Electromechanical gates can be used with solar panels and a backup battery in case of a power cut.

Environmental safety – Unfortunately, despite their durability and tenacity in heavy duty work, hydraulic systems are more prone to spillage of chemically harmful substance. If you’re looking for automatic gates at magtecelectricgates.co.uk market Harborough has, be sure they comply with UK’s environmental hazard safety requirements and standards.

Power – Electromechanical motors use high-voltage power, while hydraulic motors need fluids for movement. Hydraulic systems can also work with heavier loads, so if your gate is huge, then you can benefit with a hydraulic motor gate. They can also be opened without using full power.

Movement – Hydraulic systems have less moving parts compared to electromechanical systems, which is an advantage from a mechanical operator’s standpoint.

General Safety – Hydraulic gates are non-locking, so they can protect the system with access control in case a car runs into it.

Cost – Electromechanical motors are cheaper and more substantial than hydraulic motors, but today hydraulic systems are also incorporating small and high-speed motors in a lower price because their fluid is already the gearing medium.

Response in operation – Electromechanical systems are more dependable compared with hydraulic relief valves which depend on the fluid flow’s speed on the piping. Current sensing circuits in electromechanical systems are faster.

Automatic gates are a productive way to ensure the safety and traffic not congested in a property regardless of how spacious it is. No matter what the type of automatic gate, if incorrectly installed, will always malfunction and cause more harm than good. If you’re looking for automatic gates Leicester has today or automatic gates Loughborough shops sell, be sure to check http://www.magtecelectricgates.co.uk/ for a variety of automated gates.

Leave a Reply

Your email address will not be published. Required fields are marked *